34.10. addr2line

m1750-coff-addr2line [ -b bfdname | --target=bfdname ]
          [ -C | --demangle ]
          [ -e filename | --exe=filename ]
          [ -f | --functions ] [ -s | --basename ]
          [ -H | --help ] [ -V | --version ]
          [ addr addr ... ]

addr2line translates program addresses into file names and line numbers. Given an address and an executable, it uses the debugging information in the executable to figure out which file name and line number are associated with a given address.

The executable to use is specified with the -e option. The default is a.out.

addr2line has two modes of operation.

In the first, hexadecimal addresses are specified on the command line, and addr2line displays the file name and line number for each address.

In the second, addr2line reads hexadecimal addresses from standard input, and prints the file name and line number for each address on standard output. In this mode, addr2line may be used in a pipe to convert dynamically chosen addresses.

The format of the output is “FILENAME:LINENO”. The file name and line number for each address is printed on a separate line. If the -f option is used, then each “FILENAME:LINENO” line is preceded by a “FunctionNAME” line which is the name of the function containing the address.

If the file name or function name can not be determined, addr2line will print two question marks in their place. If the line number can not be determined, addr2line will print 0.

The long and short forms of options, shown here as alternatives, are equivalent.

-b bfdname, --target=bfdname

Specify that the object-code format for the object files is bfdname.

-C, --demangle

Decode (demangle) low-level symbol names into user-level names. Besides removing any initial underscore prepended by the system, this makes C++ function names readable. See Section 34.9, for more information on demangling.

-e filename, --exe=filename

Specify the name of the executable for which addresses should be translated. The default file is a.out.

-f, --functions

Display function names as well as file and line number information.

-s, --basenames

Display only the base of each file name.